MR – 35U Localized Tubular Radiant Heater

Min. order: 1 Pieces

Preparation time: 1 weeks

**Product Introduction** Garmasan has designed the MR 35U Localized Tubular Radiant Heater as a premier heating solution for semi-industrial spaces, sports halls, restaurants, and outdoor areas. With a thermal capacity of 35,000 kW (30,000 kcal/h), this unit is an ideal choice for providing uniform and effective heating in environments with appropriate dimensions and heights ranging from 4 to 5 meters. By installing this localized radiant heater, users benefit from high-efficiency heating and optimized energy consumption. Shayanir Tahvieh, as a specialized supplier of heating equipment, recommends this product to its customers due to its powerful performance, localized design, and significant fuel savings. **Tubular Radiant Heating Technology** Utilizing infrared radiant heating technology, the tubular radiant heater transfers heat directly to surfaces, people, and objects. Unlike forced-air systems that first heat the ambient air and direct it toward the ceiling, this system radiates heat directly toward the target. This heat transfer method minimizes energy loss and delivers high efficiency. The Garmasan radiant heating system functions like the sun, establishing thermal equilibrium between the device, surfaces, and individuals within a short period. People located within the unit's "thermal umbrella" experience excellent thermal comfort. **Localized Design and Flexible Installation** The MR-35U model is designed for localized (zonal) heating, concentrating warmth exactly where it is needed. With a total length of 5.80 meters and a width of 51 cm, the unit is installed at an appropriate height from the ground, occupying no floor space. Users can install this heater in two ways: ceiling-mounted (horizontal) with a minimum height of 4.4 meters, or wall-mounted (angled) with a minimum height of 3.7 meters. The unit weighs 100 kg, and its high-altitude installation allows users to maximize their workspace. Users can adjust the heating based on the requirements of different sections and control each zone independently. **Significant Energy Savings with the MR 35U Localized Tubular Radiant Heater** Garmasan radiant heating systems significantly reduce energy consumption compared to traditional heating systems. This system reduces gas consumption by up to 60% and electricity consumption by up to 90% compared to central boiler rooms and unit heaters. The high thermal efficiency of these units drastically lowers heating costs. Electricity consumption is very low (approximately 125W at 220V single-phase), used only for the ignition system and the suction fan. The device operates on city gas at residential pressure, with a maximum natural gas consumption of 3.4 cubic meters per hour. The heater supports both natural gas (NG) and liquefied petroleum gas (LPG). **Key Features and High Safety of the MR 35U** * **Uniform and Rapid Heating:** Provides fast, uniform heating throughout the hall without creating hot or cold spots. Users feel the desired warmth on the floor within 10 to 20 minutes of turning on the units. * **Reduced Floor-to-Ceiling Temperature Gradient:** In radiant heating, the temperature difference between areas near the floor and under the ceiling is negligible. In forced-air systems, hot air rises, creating a noticeable temperature gap. * **Zonal Heating Capability:** Users can divide the heating system into several independent zones and heat only the staff workstations. * **No Need for a Central Boiler Room:** By eliminating water from the heating cycle and removing the need for boiler rooms, piping, and ductwork, secondary costs are reduced to zero. * **Prevention of Dust Circulation:** Radiant heating does not move air, preventing dust from scattering in the environment—a vital feature for maintaining health standards in industrial settings. * **Advanced Safety Systems:** Equipped with a flow switch, gas control valve, and a 4-amp overcurrent fuse to ensure the highest level of user safety. All units come with a 3-year Garmasan warranty. * **Standard Safety Clearances:** Mandatory minimum safety distances for installation include 45 cm from the top, 60 cm from the sides, and 160 cm below the radiant tubes. **Diverse Applications for the MR 35U** * **Industrial Halls and Workshops:** Providing uniform and effective heating for manufacturing and assembly industries. * **Sports Halls:** Rapid heating for intermittent-use sports facilities, eliminating the need to keep the system running during off-hours. * **Restaurants, Cafés, and Roof Gardens:** Providing a thermal umbrella for customers in semi-open and outdoor spaces. * **Villas and Gardens:** Heating semi-open spaces in villas during cold seasons. * **Greenhouses and Poultry Farms:** Uniform heating and ambient temperature elevation for plant growth and poultry farming.